Performance:
Outside Glazed:
* Design Pressure = +60/-50 PSF
* Maximum DLO at design pressure 46 1/4'' x 72''
* Spans up to 10'-0'' with maximum mullion spacing at 48'' on center
* Air infiltration at 6.24 PSF " less than .06 CFM
* Water @ 15 PSF

Inside Glazed:
* Design Pressure = +40/-40 PSF
* Maximum DLO at design pressure 46 1/4'' x 92 1/2''
* Water @ 15 PSF
* Spans up to 8'-0'' with maximum mullion spacing at 48'' on center
* Air infiltration at 6.24 PSF less than .06 CFM

Features Include:
* 1 3/4'' x 4 1/2'' for 1/4'' of 3/8'' glazing infill
* Screw-spline joinery using #14 x 1'' spline screws
* Hydraulic Coral-Punch or drill jig fabrication options
* Deep pocket perimeter sections:
* Allows for direct anchor attachment to substrate
* Eliminates drilling access holes and blind caulk seals
* Eliminates flat filler plate at head and wall jambs
* Allows for 1/4'' diameter hex head anchor bolts to substrate
* Light, standard and heavy wall mullion options
* Fully tested for inside and outside glazing
* Full height subsill flashing with ''C'' slot for holding sealant